top of page

Frybread Recipes

  • Nov 18, 2020
  • 5 min read

Updated: Aug 20, 2024



By 1890, the Lakota people, once powerful and free, were entirely dependent on the U.S. government. The U.S. had forcibly removed our people from our homeland, confined them to reservations and cut their rations by half.


That 'ol Indian Fry Bread made of lard & flour ~


"Do you know where the 'idea' of frybread comes from, young one?", asked the Elder...

Everyone sat back and looked so eager to hear the story this beautiful Elder was about to tell, all smiles...

"Buggy flour and rancid lard", he said softly with his head down... Flour, you know, with bugs in it, and lard that had gone bad... that was all we got from the Indian Agent.


That was all we had to cook with, it was all we had to eat... Buggy flour and rancid lard... And so, we 'cooked' with both... That is how this European mystical and wonderful idea of 'frybread' came about... I just thought I would tell you."


Courtesy of Claudette Johnson Pine Ridge Agency South Dakota, 1891 Denver Public Library Digital Collection


FRYBREAD RECIPES FROM VARIOUS TRIBES!

Old Fashioned


INGREDIENTS

  • 4 cups flour

  • 2 tbsp. baking powder

  • 1 tsp. salt

  • 1/2 cup shortening

  • 1 cup warm water


DIRECTIONS Mix flour, baking powder and salt. Gradually add in the shortening and water. Add only enough water to make dough stick together. Knead dough until smooth, make into fist-sized balls. Cover them with a towel for 10 minutes then pat them out into circles about the size of a pancake. Fry in hot cooking oil in cast iron skillet until brown on both sides. Drain on paper towels, serve with jam.


Traditional

INGREDIENTS

  • 1 pkg. dry yeast

  • 3 cups warm water

  • 1 tbsp. salt

  • 1 tbsp. sugar

  • 6 cups flour

  • 2 tbsp. oil

  • 1/2 cup cornmeal


DIRECTIONS Dissolve yeast in warm water then add salt and sugar. Let stand for 5 minutes covered with a towel. Add flour and oil to liquid mixture. Mix and put on floured bread board and knead until mixture is smooth. Put dough in a greased bowl, cover with towel and let it rise for 1 1/2 hours. Remove from bowl and put on bread board, knead in the 1/2 cornmeal. Make dough into 2 balls rolling each into 12-inch circles 1/2 inch thick. Cut into 2 inch squares and drop into hot cooking oil. (Works best with cast iron skillet.) Fry 5 to 6 pieces at a time for only a few moments. Drain on paper towel and sprinkle with white powdered sugar.


Blackfeet

INGREDIENTS

  • 4 cups flour

  • 1 Tbsp. powdered milk

  • 1 Tbsp. baking powder

  • 1 tsp. salt

  • 1 1/2 cups warm water

  • Oil for frying


DIRECTIONS Mix all dry ingredients thoroughly. Add water. Knead until soft, then set aside for one hour. Shape into small balls. Flatten each ball into a circle with or rolling pin or by hand. Fry in a skillet half-full of oil until golden brown on both sides.


Cherokee

INGREDIENTS

  • 1 cup flour

  • 1/2 tsp. salt

  • 2 tsp. baking powder

  • 3/4 cup milk


DIRECTIONS Mix ingredients adding more flour if necessary, to make a stiff dough. Roll out the dough on a floured board till very thin. Cut into strips 2 X 3 inches and drop in hot cooking oil. Brown on both sides. Serve hot with honey.


Chickasaw


INGREDIENTS

  • 2 cups sifted flour

  • 1/2 tsp. salt

  • 4 tsp. baking powder

  • 1 egg

  • 1/2 cup warm milk


DIRECTIONS Stir first three ingredients then stir in the beaten egg. Add milk to make the dough soft. Roll it out on floured bread board, knead lightly. Roll dough out to 1/2 inch thick. Cut into strips 2 X 3 inches and slit the center. Drop into hot cooking oil and brown on both sides. Serve hot.

Pumpkin Fry Bread

Add the following to the ingredients shown above to make Pumpkin Fry Bread

  • 2 cups fresh pumpkin or 1-16oz. can pumpkin

  • 1 tbsp. milk or water

  • 3/4 cups brown sugar

  • 1/4 tsp. cinnamon

  • 1/4 tsp. nutmeg

  • 1/4 tsp. vanilla


Drop into hot cooking oil and brown on both sides. Serve hot with butter or powdered sugar.


Creek

INGREDIENTS

  • 2 cups flour

  • 1 cup buttermilk

  • 1 tbsp. baking powder

  • 1/4 tsp. salt


DIRECTIONS Sift flour, salt and baking powder then add milk and more flour to make dough stiff. Roll out onto floured bread board and cut into 4 X 4 squares with a slit in the center. Fry in hot cooking oil until golden brown. Drain on plate with paper towels.


Navajo #1

INGREDIENTS

  • 1 C flour

  • 1 t baking powder

  • 1/4 C powdered milk

  • 1/4 t salt

  • warm water


DIRECTIONS Combine the ingredients and slowly add enough warm water to form dough. On a lightly floured surface, knead dough until it is smooth soft and not sticky. Cover and let rest 1 hour. Shape into small balls and pat into flat circles about 1/4-1/2 inch thick. Set aside.


In skillet, heat 1/2-inch vegetable oil. Brown dough circles on each side and drain on paper towels.


Serve with chile beans and your favorite taco toppings for "Navajo Tacos."


Navajo #2

INGREDIENTS

  • 3 cups unbleached flour, sifted

  • 1/2 cup dry powdered milk

  • 1 Tbs. baking powder

  • 1/2 tsp. salt

  • 1/2 cup warm water or milk

  • 2 quarts oil for deep frying


DIRECTIONS Combine the first 5 ingredients in a large mixing bowl and knead until smooth and soft, but not sticky. Depending on the altitude and humidity, you may need to adjust the liquid or the flour, so go slowly and balance accordingly. Be careful not to overwork the dough, or it will become tough and chewy. Brush a tablespoon of oil over the finished dough and allow it to rest 20 minutes to 2 hours in a bowl covered with a damp cloth. After the dough has rested, heat the oil in a broad, deep frying pan or kettle until it reaches a low boil (375º). Pull off egg-sized balls of dough and quickly roll, pull, and path them out into large, plate-sized rounds. They should be thin in the middle and about 1/4-inch-thick at the edges. Carefully ease each piece of flattened dough into the hot, boiling oil, one at a time. Using a long-handled cooking fork or tongs, turn the dough one time. Allow about 2 minutes cooking time per side. When golden brown, lift from oil, shake gently to remove bulk of oil, and place on layered brown paper or paper towels to finish draining.

Serve hot with honey, jelly, fine powdered sugar, wojape, or various meat toppings.

Hint:

The magic is in frying the bread quickly! The hotter the oil, the less time it takes to cook. The less time it takes to cook, the lighter the texture and lower the fat content.


Osage


INGREDIENTS

  • 4 cups all-purpose flour

  • 2 tsp salt

  • 1 tbsp and a half baking powder

  • 1 tablespoon melted shortening

  • 2 cups warm milk

  • Shortening for deep frying


DIRECTIONS Sift flour, salt, and baking powder into bowl. Stir in shortening and milk. Knead the dough into a ball. Roll out dough on lightly floured board. Cut into diamond shapes and slice a slit in the center. Heat shortening in deep fryer to 370 degrees. Fry 2 or 3 at a time until golden brown on both sides. Drain on paper towels.


Seminole

INGREDIENTS

  • 2 cups flour

  • 3 tsp. baking powder

  • 1 tsp. salt

  • 1 cup milk


DIRECTIONS Mix flour, baking powder and salt. Add milk gradually making sure the dough is stiff. Put on floured bread board and pat it out with your hands until it is 1/2 inch thick. Cut into strips with a slit in the center. Fry in hot oil until both sides are golden brown.



Navajo Fry Bread

By Glenda Longhorn

INGREDIENTS

  • 4 ½ Cups Flour

  • 1 Tbsp baking Powder

  • 1 ¼ cup Warm Water

  • 2 Tbsp Powdered Milk

  • 1 Tsp Salt


DIRECTIONS Mix and knead then let stand 30 minutes. Roll to about 1/8-inch-thick on lightly floured board. Cut into any shape desired. Fry in deep fat (vegetable oil) at 400 - 450 degrees until crisp.

335 Comments


Sages Yog
Sages Yog
6 hours ago

Yoga hip opening poses are essential for improving flexibility, relieving lower body tension, and enhancing overall mobility. These poses gently stretch the hips, thighs, and lower back, making them especially beneficial for people who sit for long hours or experience stiffness. Regular practice of yoga hip opening poses can help release stored stress and emotions, as the hips are often considered a major storage area for tension in the body.Some popular yoga hip opening poses include Butterfly Pose, Pigeon Pose, and Garland Pose. These asanas work deeply into the hip joints, improving circulation and promoting relaxation. Incorporating yoga hip opening poses into your daily routine can also support better posture, reduce the risk of injury, and prepare the body for more…


Like

cilol68803
11 hours ago

Sometimes, it gets extremely complicated at the back end, and much happens between that final mouse-cling and when your new mug shows up on your front door. With the Ecommerce Operations Services phenomenon going ballistic, e-commerce will constitute 17 percent of all retail sales by 2027 which means there is no time like now not to be left behind in the fray without compromising the quality. Out of slotting, picking, packing and shipping, every aspect of the fulfillment and supply chain must be optimized toward e-commerce to prevent hiccups and waste.


Like

Sona Yadav
Sona Yadav
17 hours ago

Web Development Services could be a simple page or a huge, glitzy system running in your browser; it is web development. The larger the site, the larger the different teams required. Teams are divided by what aspect of dev they work on: Front-end is the appearance and the interface that the users interface with. Back-end hardware is the server back and server intelligence. Full-stack refers to doing front and back simultaneously. Specifically, web dev is a combination of varied skills, and the majority of devs learn something about everything and will switch jobs.

Like

Vg Steel
Vg Steel
a day ago

Thanks for sharing this! Hot dip galvanizing is a cost-effective solution for protecting steel from rust and damage. It’s great to know there are professional service providers available in Malaysia.

Like

Servotech Inc
Servotech Inc
2 days ago

A mechatronic design engineer integrates mechanical systems, electronics, sensors, actuators, and embedded software to develop intelligent products. They design, simulate, and optimize automated systems, ensuring high performance, efficiency, and reliability across robotics, automotive, industrial automation, and advanced engineering applications.

Like
bottom of page